Government of New Brunswick
  • Description
  • Fees
  • Contacts
  • Overview

    Design registration, Quality assurance plans and welding procedure registration are required to ensure acceptable standards of quality.

    Eligibility

    Manufacturers of boilers, pressure vessels or pressure piping systems to be installed in New Brunswick must submit designs for registration.

    Owners of Boilers and pressure vessels are required to be register the devices annually.

    All Boiler and Pressure Vessels must be inspected before going into service.

    Description

    Design registrations are required for boilers, pressure vessels, and pressure fittings and may be submitted directly to the Chief Inspector or to the Chief Inspector through an approved design review organization (ACI Central is the approved design review organization).

    Manufacturers and installers of boilers, pressure vessels and pressure piping systems must register quality assurance/control plans with the Inspection Services branch of the Department to ensure that acceptable quality control systems are in operation.

    Welding procedures for welding boilers, pressure vessels or pressure piping systems must be registered with Inspection Services.

    Fees

    Unless otherwise specified, Fees exclude the harmonized sales tax (HST).

    Fee DescriptionRate in $Effective Date
    YYYY-MM-DD
    Registration of designs for boilers, pressure vessels or pressure piping systems  
      for designs submitted for registration through a design review organization approved by the Chief Inspector 50.002012-02-23
      for designs submitted for registration directly to the Chief Inspector 250.002012-02-23
    Registration of designs for fittings  
      for single fittings, a group of fittings shown on one drawing or fittings in catalogues and brochures, submitted for registration through a design review organization approved by the Chief Inspector50.002012-02-23
      for single fitting or a group of fittings shown on one drawing, submitted for registration directly to the Chief Inspector 100.002012-02-23
      for fittings in catalogues and brochures submitted for registration directly to the Chief Inspector200.002012-02-23
    The fee for the approval of a quality assurance or quality control system or approval of a quality assurance or quality control manual (per hour or any part of an hour)100.002012-02-23
    Registration of each welding procedure (per hour or any part of an hour)100.002012-02-23
    Annual boiler / pressure vessel registration fee (per device)25.002012-02-23
    Contact Email Location
    Bathurst
    Campbellton
    Edmundston
    Fredericton
    Miramichi
    Moncton
    Saint John
    Woodstock